Damp and mould in Auckland houses: causes and fixes
Mould is a symptom. The patch on the bedroom ceiling or the black spotting on a window sill tells you that moisture is arriving faster than the house can shed it. Wiping it off is sensible, but unless the moisture source changes, it will be back within weeks.
The useful question is therefore not "how do I clean this?" but "where is the water coming from?". In most houses there are only four answers.
The four sources of damp
Healthify NZ's guide to damp and mouldy homes lists the common causes: building leaks, faulty or damaged plumbing, flooding, condensation from activities in the bathroom, laundry and kitchen, and little or no airflow in places such as cupboards. Sorted by where you will find them:
- Rain getting in. Failed flashings, cracked cladding, blocked gutters and downpipes that discharge against the wall.
- Water from plumbing. A weeping joint under a bath or a leaking washing machine hose can feed a wall for months.
- Ground moisture. Bare soil under a suspended floor, or a concrete slab or wall that is wet.
- Everyday living. Showers, cooking, drying washing indoors, even breathing, release water vapour into the air. When warm, moist air meets a cold surface, it condenses.
Most older houses have more than one of these at work.
Reading the signs
Consumer NZ's guide to dealing with mould lists symptoms that suggest a moisture problem rather than a one-off: musty smells in rooms that are closed up, damp or mouldy clothes in wardrobes, mould behind pictures and mirrors, stains or watermarks on ceilings and walls, rotting timber, and mould under the house.
A rough way to separate condensation from a leak: condensation tends to appear on cold surfaces, such as window glass, aluminium frames, outside walls and the corners of rooms, and tends to worsen in winter and after showers. A leak is more likely if the damp follows rain or the use of one particular appliance, or shows up in rooms that are warm and well aired. If you cannot tell, a plumber or a building inspector can check for hidden sources.
Why it matters
The health case is well established. Environmental Health Intelligence NZ reports that damp and mouldy living conditions raise the risk of respiratory illness such as cough, wheeze and asthma, and are associated with stress, anxiety and depression. In its 2023 figures, 20.6 per cent of New Zealanders lived in dwellings that were damp sometimes or always, and 16.5 per cent lived in houses with mould larger than an A4 sheet of paper. Both figures were lower than in 2018, but they are still one in five and one in six.
Healthify adds that babies, children, older adults, people with eczema, respiratory conditions or weakened immune systems are most affected.
Cleaning mould safely
Do the cleaning first, so you are not feeding fresh spores into a damp room. Healthify suggests wearing gloves, eye protection and a mask, then cleaning with a sponge or cloth and rinsing it often. It gives two solutions: white vinegar and water in equal parts, or household bleach and water at one part bleach to three parts water. Consumer NZ suggests soapy water for small patches on hard surfaces, drying the area well afterwards. Do not mix cleaning products with each other.
Porous materials, like plasterboard that has been soaked for weeks, are another matter. If mould has penetrated, or the area is bigger than you can reasonably clean, get advice before you start.
Fixing the cause
Work from the outside in.
Water entry. Healthify's owner checklist says to check that downpipes and gutters join up and carry water away from the house, that plumbing has no leaks around baths, showers and appliances, and that wall and roof cladding and flashings are intact. Repair damage as you find it.
The ground. Tenancy Services' moisture ingress and drainage standard is written for rentals, but its benchmark is useful to any owner: an enclosed subfloor should have a ground moisture barrier, generally polythene sheet laid on the soil, and the property should have efficient drainage for stormwater, surface water and groundwater. The standard also notes exemptions where a professional installer cannot reach the area without substantial work.
Air. Make sure extractor fans and rangehoods vent to the outside. Healthify warns that a vented appliance that discharges into another part of the house only moves damp air around. Open windows regularly, pull furniture slightly away from walls, lift mattresses off the floor, dry laundry outside, and put lids on pots.
Cold surfaces. Insulating the ceiling and floor, and improving glazing, reduce the cold surfaces where condensation forms. Tenancy Services puts the benefit plainly: the better insulated a home is, the more heat it retains, the drier it will be and the less prone to mould. Healthify points out that the Warmer Kiwi Homes programme offers grants of 50 to 90 per cent off insulation, and up to 90 per cent off heating, for eligible households, so check whether you qualify before paying in full. Wiping condensation off windows each morning with a towel, as Consumer NZ suggests, takes the water out of circulation before it soaks into frames and sills.
When to call a professional
If mould keeps returning despite good habits, a hidden leak or a cladding failure may be the cause. Consumer NZ notes that it is often caused by moisture issues in the building that may be beyond a resident's control. Building inspectors and plumbers can use moisture meters to find what you cannot see. And if mould is affecting someone's health, see a GP.